Gebrik FixingsGebrik can be applied to many substrates, including clay or concrete masonry, light gauged steel frame walling or timber frame walling, using the appropriate quantity and type of fixings. The system is applied to a solid background so where either steel or timber stud walling is used, an exterior grade board should first be securely fixed to the vertical studs (typically at 600mm centres) and the Gebrik system can then be applied to the board. The number of fixings for each component depends on the exposure of the building, i.e. typically the height and wind pressure on the finished façade. h = 0 - 10m:use 9 fixings (3 rows of 3) W = 2301 Nm² h = 10 - 18m:use 12 fixings (4 rows of 3) or (3 rows of 4)W = 2565 Nm² h = 18 - 65m:use 16 fixings (4 rows of 4) W = 2831 Nm² If there is any doubt about the type and length of fixing, please contact our Technical Department for further advice.